|
a.
|
Art must be supplied on an 8 1/2" x 11" letter size
paper, drawn or printed in black ink. |
|
b. |
The paper size must not exceed the standard
8 1/2" x 11" letter format. We cannot accept transparencies
or semi-transparent paper. |
|
c. |
Areas to
be printed must be in solid black ink. There should be
no shading, half tones, screens or dotted patterns
on the printed art. |
|
d. |
All
lines drawn must have a minimum thickness of .01 inches. This is
approximately the same thickness as a medium point ball point pen.
However drawing with a ball point pen is not suggested. |
|
e. |
There should be no
pencil marks. All edges of the art including type must be crisp
& clean. |
|
f. |
No taped or glued pieces can be accepted. |
|
g. |
Art
submitted must be close to original size. Unless noted, we will
however enlarge or reduce the art if necessary. |
|
h. |
Computer
generated art is the best way to provide camera ready art. However
it must be printed on a black & white laser printer or if a
color printer is used, make sure all printout is in dark black
ink. Also if the graphics shows in color on your computer monitor,
it will print in shades which is not acceptable. So be sure to
check your output before submitting.
|
|
i. |
To place
an order, fax us the completed
order form along
with the art work. Once we receive your order and art, we will reply
within 24 hours with a confirmation and an assigned order number. In
most all cases, you will need to send the art to us for best
reproduction. |
|
j. |
When
mailing the art to us, be sure to use a large enough envelope and
use a thin card-board behind the art work to avoid any damage in
mailing. Do not fold the art and do not mail us your only copy. For
faster processing, be sure to indicate your assigned order number
when sending your art. |
|
k. |
For
mailing address, see the "How
To Contact Us" page. |
